Carrier XL 925-1225
9.2-12.2m
5-13cm
>400hp
125mm
Enormous depth capacity
Carrier XL 925-1225 is a trailed disc cultivator, available with 30.5' or 40' (9.25 or 12.25 m) working width. It can be fitted with 20" or 24" (510 or 610 mm) discs. The sizes of the discs make them well suited to incorporate large amounts of crop residues even at depth. The disc angle can be adjusted according to working depth. With a high working speed, it has a working capacity of up to 40 acres (16 hectares) per hour. This lowers the capital costs per acre to a minimum.
Carrier is a disc cultivator used for high speed primary tillage and seedbed preparation. The wide range of front tools, discs and packers enables Carrier to handle the versatile challenges of modern farming – from ultra-shallow cultivation to a deeper incorporation. The versatility it brings to the farm saves passes, decreases machine cost per acre and provides the best start possible for the coming crop.
Selected features
Discs allowing for increased working depth
Carrier XL can be fitted with either 510mm or 610mm TrueCut discs. In comparison, the 510mm disc increases the space around the disc which allows for a higher throughflow. The 610mm on the other hand, enables greater working depth, which is a benefit when incorporating large amounts of crop residues, such as harvested maize stubble
MultiSet offers versatility
The adjustable MultiSet disc hubs allow the disc angle to be set to one of three positions between 11 and 17 degrees. This enables the disc aggressiveness to be adjusted to fit different working depths.
Thereby a perfect slicing can be achieved during shallow cultivation, and a good penetration can be ensured at a greater working depth.
The obvious choice for 12 m CTF
The large Carrier L/XL 1225 has a working width of 12.25 m, this gives a slight overlap required in a 12 m CTF-system.
Thanks to the x-disc layout, the machine will always run dead straight behind the tractor. This is essential when using GPS-control or when cultivating in hilly terrain.
Easy and safe to transport
Carrier L/XL 925-1225 uses the unique Väderstad folding system, giving a fast transition from field to transport. The folding technique has been designed to give the machine a low centre of gravity, resulting in safe manoeuvring.
When folded the transport width is 3 m.
Even weight – even result
Carrier L/XL 925-1225 is equipped with weight packages in the wing sections. This ensures the weight is evenly distributed across the entire working width without the need for complex hydraulic solutions.
Heavy duty frame – long working life
Carrier L/XL 925-1225 has an extremely robust frame, ensuring a long working life even in the toughest conditions. Its few greasing points reduces the maintenance required leading to more time in field.
Product concept
Zone 1 - Intensive cutting and mixing
Two rows of high quality V-55 hardened Swedish steel discs aggressively cuts and mixes harvest residues down to 16cm working depth. The conical shape of the discs ensures a long working life and good crumbling of the soil.
TrueCut 510mm discs
TrueCut 610mm discs
Zone 2 - Reconsolidation
Carrier can be equipped with packers suitable for a wide range of field conditions. The rubber suspension on the packer absorbs shocks and extends the working life of the frame and the packer.
Single SteelRunner
Image gallery
Technical data
| Carrier XL | 925 | 1225 |
| Effective working width (m) | 9,15 | 12,15 |
| Packer width (m) | 9,25 | 12,25 |
| Transport width (m) | 3 | 3 |
| Transport height (m) | 4 | 4 |
| Weight with single SteelRunner (kg) | 10400 | 13100 |
| Number of discs | 76+1 | 100+1 |
| Disc spacing (cm) | 25 | 25 |
| Disc angle | 12-19 | 12-19 |
| Brakes | H/P | H/P |
| Recommended working speed (km/h) | 10-14 | 10-14 |
| Wheel dimension (transport wheels) | 400/60-15.5 | 520/50-17 |
| Wheel dimension (transport wheels) option | 520/50-17 | N/A |
| Hydraulic requirements (DA) | 2 | 2 |
| Draught requirements from (hp) | 340 | 400 |
| Väderstad has made every attempt to accurately portray our product lineup. However, due to our commitment to continually innovate our technologies to provide our customers the best possible products, some products may not be manufactured as shown on this site. Exact specifications for each product will be confirmed at the time of ordering. |
| LS = Load sensing | FR = Free return | DA = Double acting | ||
| H = Hydraulic | P = Pneumatic | N/A = Not available |
Search product documents
Are you looking for product documents such as Manuals, Spare part books or Quick starts for your Väderstad product? Manuals and Spare Part books are available for all products we produced since 1962.
